Sie befinden sich hier: Home   Tracheostoma   Tracheostomy tubes   Silicone tubes

Silicone tracheostomy tubes

The Provox® LaryTube™ is a short silicone tracheostomy tube with a 22-mm connector to take up an HME or tracheostoma valve. The LaryTube™ is available in a sieved (fenestrated) or unsieved (standard) version. A third design of the LaryTube has a blue sealing ring under the 22-mm connector and no grommets on the sides. This design is intended for use in a tracheostoma adhesive.

The LaryTube™ is a very pleasant to wear tracheal cannula that is well proven in clinical use. Thanks to the conical transition between the connector and the cannula shaft, they provide a good seal on the tracheostoma when speaking.

It can be attached by a collar or the LaryClip. The LaryTube™ can be sterilized, but must only be used for one patient.

LaryTube™ Inner diameter in mm Outer diameter in mm Length in mm Standard Fenestrated With ring
8/27 9,5 12,0 27 +    
8/36 9,5 12,0 36 + + +
8/55 9,5 12,0 55 + + +
9/27 10,5 13,5 27 +    
9/36 10,5 13,5 36 + + +
9/55 10,5 13,5 55 + + +
10/27 12,0 15,0 27 +    
10/36 12,0 15,0 36 + + +
10/55 12,0 15,0 55 + + +
12/27 13,5 17,0 27 +    
12/36 13,5 17,0 36 + + +
12/55 13,5 17,0 55 + + +

The combination of a tracheostoma adhesive and a silicone tube (here, the Provox® Regular round adhesive and Provox® LaryTube with a ring) can be advantageous if using an HME or tracheostoma valve.

The cannula stabilizes the tracheostoma, and the tracheostoma adhesive seals it.