Blom Singer

Blom-Singer offers a reusable system consisting of a stable plastic base (Tracheostoma Valve Housing) combined with double-sided adhesive rings (Adhesive Tape Discs) with various properties for tracheostoma provision with a plaster. This very stable system was developed primarily for using a tracheostoma valve. A range of disposable tracheostoma plasters is also available (TruSeal). Both the plastic base and the plasters have a 22-mm connector.

Blom-Singer DISPOSABLE PLASTERS

Blom-Singer Adhesive Housing

The Blom-Singer Adhesive Housing is Blom-Singer's basic tracheostoma plaster. It consists of a water-repellent film.

Blom-Singer TrueSeal Contour

The Blom-Singer TrueSeal Contour tracheostoma plaster is a further development of the Adhesive Housing. It is also a foil plaster, and the inner area is reinforced with plastic.

Trueseal Contour Oval
Trueseal Contour Round
Trueseal Contour Standard

Blom-Singer TrueSeal Contour Low Profile

On the Blom-Singer TrueSeal Contour Low Profile, the 22-mm connector was shifted to the inside towards the tracheostoma in order to achieve a flat profile between the plaster and HME. The 22-mm connector protrudes from the plaster to the inside towards the tracheostoma.

 

Attached with a thin adhesive film ring and silicone skin adhesive
With a Provox Freehands tracheostoma valve

Blom-Singer REUSABLE PLASTERS

Blom-Singer Tracheostoma Valve Housing

The Blom-Singer Tracheostoma Housing is a reusable plastic disc that is used to attach a tracheostoma valve or an HME. It has a 22mm connector, and is available in two sizes (standard/large) and two material thicknesses (normal/PVC = stronger). The plastic discs are much stronger than other tracheostoma plasters, but do not have a layer of adhesive. A double-sided adhesive ring is placed on the plastic disc to apply it to the tracheostoma. It is chosen to suit the skin type and desired strength of adhesion. A silicone adhesive may also be applied to the skin. The plastic discs have proven successful in practical use at high blowing pressures and with irregular neck profiles (e.g. with a tracheostoma between the bases of the M. sternocleidomastoideus). Removing the adhesive rings before reusing the plastic disc is tedious. However, this does not have to be done on a daily base.

Blom-Singer Adhesive Tape Discs


The adhesive discs for the Blom-Singer Tracheostoma Valve Housing are available in two sizes (standard and large) and 5 versions: 

  • Regular Adhesive Tape Discs 
  • Regular Adhesive Foam Discs
  • Thin Adhesive Tape Discs
  • Thin Adhesive Foam Discs
  • Heavy Duty Adhesive Tape Discs

Plaster name

Length/width in mm

Use recommended by manufacturer

TrueSeal Contour standard

95/72

Lightweight tracheostoma plaster for use with an HME

TrueSeal Contour round

65/65

Lightweight tracheostoma plaster for use with an HME

TrueSeal Contour oval

75/99

Lightweight tracheostoma plaster for use with an HME

TrueSeal Contour low profile standard

95/72

If a flat neck profile is desired 

TrueSeal Contour low profile round

65/65

If a flat neck profile is desired 

TrueSeal Contour low profile oval

75/99

If a flat neck profile is desired 

Tracheostoma Valve Housing standard

51/56

For use with a tracheostoma valve

Tracheostoma Valve Housing large

55/60

For use with a tracheostoma valve